News

2017-11-08 - 2017-11-11 • FMB - Bad Salzuflen
find out more »

Contact Sales


+49(0)36434152-0
Request callback
1

DPLSmart Marker I, DPLSmart Marker II (4, 10W)

 
Vertrieb International
ACI Laser GmbH
Österholzstraße 9
D-99428 Nohra

www.aci-laser.de
sales@aci-laser.de
Tel.: 03643/4152-0
Fax:03643/4152-77
 

Technical details


The EconomyDiode series of lasers are the perfect entry-level systems for small and medium-sized companies with a modest demand for marking. The short resonator allows an outstanding beam quality for clean and precise marking on metals, plastics, ceramics and other materials. The lasers work with thermoelectric air cooling. We do not use high-maintenance air/water or water cooling and so save the user on time-consuming maintenance work and expensive downtimes.

These systems represent a solution in accordance with laser safety class 4. For operation in accordance with laser safety class 1, ACI Laser GmbH provides a complete solution in the form of lasers with different manual workplaces.

Fields of application

The EconomyDiode lasers can be used either at a manual workplace or as integration components in an automated system.

Software

The marking software MagicMark required for operation is included in the scope of delivery. This enables the marking of texts, graphics, codes such as Data Matrix or barcodes, serial numbers, logos, wraparound circumferential marking without lap marks on rotationally symmetrical workpieces and genuine greyscale images on plastics. An intelligent rights management system supports the establishment of different operator groups, thus allowing customisation of the system to the user's individual requirements. Even semiautomatic operation with independent data exchange to different data sources is possible without any problems.

Please contact our distribution partner in your home country for further information.

Lasertype:Nd:YAG
Wave length:1064 nm
Pumping principle :Longitudinal
Laser power:4 W, 10 W (Pumpleistung)
Number of adjustable pulse lengths:15-100 ns
Pulse repetition rate:1-100 kHz
Laser class:4
Input:75W ≤ Pel ≤ 150W
Labeling field size 1:60 x 60 mm
Labeling field size 2:110 x 110 mm
Labeling field size 3:180 x 180 mm
Weight:15 kg
Length:603 mm
Width:201 mm
Height:235 mm
Connected load:100-240 VAC /16 A  /  50-60 Hz
Interfaces:USB 2.0, SPS-Interface, Interlock PLe
  • Materials
  • Metal
  • Annealing marking
  • Coating ablation
  • Material ablation
  • Plastic
  • Foaming
  • Carbonation
  • Engraving
  • Glass
  • Ceramics
  • Wood, Paper, Leather
  •  
  •  
  • gut geeignet
  • gut geeignet
  • sehr gut geeignet
  •  
  • sehr gut geeignet
  • sehr gut geeignet
  • nicht geeignet
  • nicht geeignet
  • nicht geeignet
  • nicht geeignet

unsuitable    nicht geeignet
good    gut geeignet
very good    sehr gut geeignet

Ask for this product

Print this product
4

DFLVentus Marker Standard Design (20, 50, 70W)

 
Vertrieb International
ACI Laser GmbH
Österholzstraße 9
D-99428 Nohra

www.aci-laser.de
sales@aci-laser.de
Tel.: 03643/4152-0
Fax:03643/4152-77
 

Technical details


The BusinessFibre product series of fibre laser systems are suitable for use in time-critical manufacturing processes. Although the main area of application is in metal machining, the system can also be used for marking plastics, ceramics and laser foils. For maximum flexibility, the pulse shapes of the BusinessFibre series of lasers can be variably adjusted. This enables clean and top-quality marking results, thus satisfying the highest quality standards. All fibre lasers possess air cooling. This provides long system running times with no expensive maintenance work necessary. Depending on the application, the systems can be integrated either in an ACI manual workplace or in an automated production line. A power range of 20 W to 70 W is available to the user in the BusinessFibre series. These systems represent a solution in accordance with laser safety class 4. For operation in accordance with laser safety class 1, ACI Laser GmbH also provides complete solutions in the form of lasers in conjunction with different manual workplaces.

Fields of application

The BusinessFibre lasers can be used either at a manual workplace or as integration components in an automated system.

Software

The marking software MagicMark required for operation is included in the scope of delivery. This enables the marking of texts, graphics, codes such as Data Matrix or barcodes, serial numbers, logos and wraparound circumferential marking without lap marks on rotationally symmetrical workpieces. An intelligent rights management system supports the establishment of different operator groups, thus allowing customisation of the system to the user's individual requirements. Even semiautomatic operation with independent data exchange to different data sources is possible without any problems.

Please contact our distribution partner in your home country for further information.

Lasertype:Yb:Fibre, MOPA-System
Wave length:1064 nm ± 5 nm
Laser power:20, 50, 70 W
Beam quality:1,6 ≤ M² ≤ 1,8 (applikationsabhängig, weitere Strahlqualitäten auf Anfrage)
Peak power:bis zu 10 kW
Pulse energy:bis zu 1,0 mJ
Number of adjustable pulse forms:bis zu 40
Pulse repetition rate:1 kHz–1 MHz
Laser class:4
Input:max. 600 W
Labeling field size 1:60 x 60 mm
Labeling field size 2:110 x 110 mm
Labeling field size 3:180 x 180 mm
Weight:8 kg (Kopf/head), 27 kg (Versorgungseinheit/supply unit)
Length:595/ 650 mm
Width:203/ 224 mm
Height:140/ 460 mm
Connected load:85-240 VAC, 10 A  /50-60 Hz
Interfaces:USB 2.0, SPS-Interface, Interlock PLe
  • Materials
  • Metal
  • Annealing marking
  • Coating ablation
  • Material ablation
  • Plastic
  • Foaming
  • Carbonation
  • Engraving
  • Glass
  • Ceramics
  • Wood, Paper, Leather
  •  
  •  
  • sehr gut geeignet
  • sehr gut geeignet
  • sehr gut geeignet
  •  
  • gut geeignet
  • gut geeignet
  • nicht geeignet
  • nicht geeignet
  • gut geeignet
  • nicht geeignet

unsuitable    nicht geeignet
good    gut geeignet
very good    sehr gut geeignet

Ask for this product

Print this product
11

COTwo Marker (20, 30W)

 
Vertrieb International
ACI Laser GmbH
Österholzstraße 9
D-99428 Nohra

www.aci-laser.de
sales@aci-laser.de
Tel.: 03643/4152-0
Fax:03643/4152-77
 

Technical details


The COTwo Marker is a gas laser with a wavelength of 10,600 nm, which allows plastics, glass as well as organic materials to be machined. The solely air-cooled, compact laser system is suitable for both small batch and line production. As is the case with all ACI lasers, it is equipped with an optical focusing aid and preview function to ensure easy handling. The COTwo Marker is a closed system and does not require any CO2 gas supply. This low-maintenance device allows continued operation with no long downtimes. This system represents a solution in accordance with laser safety class 4. For operation in accordance with laser safety class 1, ACI Laser GmbH also provides complete solutions in the form of lasers in conjunction with different manual workplaces.

Fields of application

The COTwo Marker laser can be used either at a manual workplace or as integration component in an automated system.

Software

The marking software MagicMark required for operation is included in the scope of delivery. This enables the marking of texts, graphics, codes such as Data Matrix or barcodes, serial numbers, logos and wraparound circumferential marking without lap marks on rotationally symmetrical workpieces. An intelligent rights management system supports the establishment of different operator groups, thus allowing customisation of the system to the user's individual requirements. Even semiautomatic operation with independent data exchange to different data sources is possible without any problems.

Please contact our distribution partner in your home country for further information.

Lasertype:CO2, sealed off
Wave length:10.600 nm
Laser power:30 W @ 50% ED, 20 W @ 75% ED
Laser class:4
Input:100 W ≤ Pel ≤ 400 W
Labeling field size 1:50 x 50 mm
Labeling field size 2:90 x 90 mm
Labeling field size 3:150 x 150 mm
Weight:20 kg
Length:740 mm
Width:201 mm
Height:233 mm
Connected load:100-240 VAC  / 16 A  / 50-60 Hz
Interfaces:USB 2.0, SPS-Interface, Interlock PLe
  • Materials
  • Metal
  • Annealing marking
  • Coating ablation
  • Material ablation
  • Plastic
  • Foaming
  • Carbonation
  • Engraving
  • Glass
  • Ceramics
  • Wood, Paper, Leather
  •  
  •  
  • nicht geeignet
  • nicht geeignet
  • gut geeignet
  •  
  • nicht geeignet
  • nicht geeignet
  • sehr gut geeignet
  • sehr gut geeignet
  • gut geeignet
  • sehr gut geeignet

unsuitable    nicht geeignet
good    gut geeignet
very good    sehr gut geeignet

Ask for this product

Print this product
19

DFLVentus Marker Industrial Design (20, 50, 70W)

 
Vertrieb International
ACI Laser GmbH
Österholzstraße 9
D-99428 Nohra

www.aci-laser.de
sales@aci-laser.de
Tel.: 03643/4152-0
Fax:03643/4152-77
 

Technical details


Fields of application

This compact laser system has been designed especially for industrial environments and the use in production lines. The stable aluminium housing is protected against dust and spray water and flexible mountable. The laser system is available as 19” built-in unit or tabletop device with various performance levels and beam qualities customizable to the requirements of the application.

Properties

• Functional safety due to PLe
  according to EN ISO 13849-1
• Protection class IP64
• 100 % air-cooled
• Ambient temperature up to 40 °C
• 4 mounting positions
• Separability of laser head and supply unit
• 3 m fiber length (optional 5 m)
• Scalable laser output power from 20 to 70 W
• Low power input
• Control with external control PC

Standard interfaces:
• Wide range input from 80 to 240 V
• 8 digital inputs and outputs
• External safety circuit acc. to PLe
• Communication interface (USB 2.0)

• Software package included
• Remote diagnostics tool
• Predefined parameter sets

Software control

The modern software architecture of ACI’s laser marking software MagicMark allows a targeted access to all available functions and control possibilities of the laser system as well as the laser peripherals (WS/DM etc.).

Internal programming:
• VB.Net [Winwrap Basic]
• Integrated in MagicMark

External programming:
• C#.Net [MS Visual Studio]
• Access to class library

Features (optional)

FocusSHIFTER (real-time height adjustment for laser marking objects with different component heights)
• Vision systems for automatic object identification (AOI), camera-supported positioning of markings (CPM) and code reading systems
• Various object lenses for different marking area sizes
• Fully integrated control (support of various communication protocols, such as TCP/IP, Industrial Ethernet, Siemens S7 connection, USB etc.)

Available interfaces:
• Encoder input for marking on-the-fly
• Serial communication interfaces (RS232, RS485)
• Ethernet communication interface (2x)
• External USB output (e.g. for camera applications

 

Please contact our distribution partner in your home country for further information.

Lasertype:Yb:Fibre, MOPA-System
Wave length:1064 nm ± 5 nm
Laser power:20, 50, 70 W
Beam quality:1,6 ≤ M² ≤ 1,8 (applikationsabhängig, weitere Strahlqualitäten auf Anfrage)
Peak power:bis zu 10 kW
Pulse energy:bis zu 1 mJ
Number of adjustable pulse forms:bis zu 40
Pulse repetition rate:1 kHz–1 MHz
Laser class:4
Input:100 W ≤ Pel ≤ 400 W
Labeling field size 1:60 x 60 mm
Labeling field size 2:110 x 110 mm
Labeling field size 3:180 x 180 mm
Weight:7 kg (Kopf/head), 25 kg (Rack)
Length:464 mm (Kopf/head), 509 mm (Rack)
Width:149 mm (Kopf/head), 483 mm (Rack)
Height:107 mm (Kopf/head), 157 mm (Rack)
Connected load:85-240 VAC, 10 A  /50-60 Hz
Interfaces:USB 2.0, SPS-Interface, Interlock PLe
  • Materials
  • Metal
  • Annealing marking
  • Coating ablation
  • Material ablation
  • Plastic
  • Foaming
  • Carbonation
  • Engraving
  • Glass
  • Ceramics
  • Wood, Paper, Leather
  •  
  •  
  • sehr gut geeignet
  • sehr gut geeignet
  • sehr gut geeignet
  •  
  • gut geeignet
  • gut geeignet
  • nicht geeignet
  • nicht geeignet
  • gut geeignet
  • nicht geeignet

unsuitable    nicht geeignet
good    gut geeignet
very good    sehr gut geeignet

Ask for this product

Print this product
2

DPLGenesis Marker, DPLNexus Marker & DPLFortis Marker (8, 12, 16W)

 
Vertrieb International
ACI Laser GmbH
Österholzstraße 9
D-99428 Nohra

www.aci-laser.de
sales@aci-laser.de
Tel.: 03643/4152-0
Fax:03643/4152-77
 

Technical details


The BusinessDiodeIR series of lasers are the all-rounders in the ACI range. Their high energy efficiency and beam quality make them suitable for use both with individual components and in series production lines. The systems are typically used in manual workplaces for marking entire pallets with workpieces as well as in automated production lines. The excellent beam quality enables clean and precise marking on metals, plastics and ceramics. Lasers ranging between 8 W, 12 W and 16 W can be selected according to the application and the marking time available. All Nd:YAG lasers possess thermoelectric air cooling. This provides long system running times with no expensive maintenance work necessary. These systems represent a solution in accordance with laser safety class 4. For operation in accordance with laser safety class 1, ACI Laser GmbH also provides complete solutions in the form of lasers in conjunction with different manual workplaces.

Fields of application

The BusinessDiode lasers can be used either at a manual workplace or as integration components in an automated system.

Software

The marking software MagicMark required for operation is included in the scope of delivery. This enables the marking of texts, graphics, codes such as Data Matrix or barcodes, serial numbers, logos, wraparound circumferential marking without lap marks on rotationally symmetrical workpieces and genuine greyscale images on plastics. An intelligent rights management system supports the establishment of different operator groups, thus allowing customisation of the system to the user's individual requirements. Even semiautomatic operation with independent data exchange to different data sources is possible without any problems.

Please contact our distribution partner in your home country for further information.

Lasertype:Nd:YAG
Wave length:1064 nm
Pumping principle :Longitudinal
Laser power:8, 12, 16 W
Number of adjustable pulse lengths:15-100 ns
Pulse repetition rate:1-100 kHz
Laser class:4
Input:100 W ≤ Pel ≤ 300 W
Labeling field size 1:60 x 60 mm
Labeling field size 2:110 x 110 mm
Labeling field size 3:180 x 180 mm
Weight:20 kg
Length:740 mm
Width:201 mm
Height:233 mm
Connected load:100-240 VAC / 16 A / 50-60 Hz
Interfaces:USB 2.0, SPS-Interface, Interlock PLe
  • Materials
  • Metal
  • Annealing marking
  • Coating ablation
  • Material ablation
  • Plastic
  • Foaming
  • Carbonation
  • Engraving
  • Glass
  • Ceramics
  • Wood, Paper, Leather
  •  
  •  
  • sehr gut geeignet
  • gut geeignet
  • sehr gut geeignet
  •  
  • sehr gut geeignet
  • sehr gut geeignet
  • nicht geeignet
  • nicht geeignet
  • gut geeignet
  • nicht geeignet

unsuitable    nicht geeignet
good    gut geeignet
very good    sehr gut geeignet

Ask for this product

Print this product
21

DFLVentus Marker Eco (10, 20, 30W)

 
Vertrieb International
ACI Laser GmbH
Österholzstraße 9
D-99428 Nohra

www.aci-laser.de
sales@aci-laser.de
Tel.: 03643/4152-0
Fax:03643/4152-77
 

Technical details


The fibre laser DFLVentus Marker of the product serie EconomyFIBRE is an easy-to-use fibre laser system according to laser class 1. It offers a significant price advantage compared to the fibre lasers of the product serie BusinessFIBRE and therefore is an ideal entry-level system into laser material processing. According to DIN EN ISO 13849-1 comply with the safety standards and guidlines for functional safety.

Fields of application

Despite it's simple construction DFLVentus Marker Eco is a reliable, robust fibre laser for the marking of various metals and plastics.This fibre laser is suitable for simple and yet powerful marking applications, especially on stainless steel it achieves outstanding black marking results.

DFLVentus Marker of the serie EconomyFIBRE is best used in combination with the laserstation WorkstationBASIC. This fibre laser can be used either in a manual workplace or as integration component in a production line.

Software

The marking software MagicMark required for operation is included in the scope of delivery. This enables the marking of texts, graphics, codes such as Data Matrix or barcodes, serial numbers, logos and wraparound circumferential marking without lap marks on rotationally symmetrical workpieces. An intelligent rights management system supports the establishment of different operator groups, thus allowing customisation of the system to the user's individual requirements. Even semiautomatic operation with independent data exchange to different data sources is possible without any problems.

Please contact our distribution partner in your home country for further information.

Lasertype:Yb:Fibre, Q-switched
Wave length:1064 nm ± 4 nm
Laser power:10, 20, 30 W
Beam quality:1,6 ≤ M² ≤ 1,8
Peak power:bis zu 12,5 kW
Pulse energy:bis zu 1 mJ
Number of adjustable pulse lengths:80~140 (frequenzabhängig)
Pulse repetition rate:20~80 kHz (systemabhängig)
Laser class:4
Input:200 W ≤ Pel ≤ 300 W
Labeling field size 1:60 x 60 mm
Labeling field size 2:110 x 110 mm
Labeling field size 3:180 x 180 mm
Weight:8/ 20 kg (Laserkopf/ Versorgungseinheit)
Length:595/ 650 mm
Width:202/ 225 mm
Height:140/ 460 mm
Connected load:85-240 VAC, 10 A  /50-60 Hz
Interfaces:USB 2.0, SPS-Interface, Interlock PLe
  • Materials
  • Metal
  • Annealing marking
  • Coating ablation
  • Material ablation
  • Plastic
  • Foaming
  • Carbonation
  • Engraving
  • Glass
  • Ceramics
  • Wood, Paper, Leather
  •  
  •  
  • sehr gut geeignet
  • sehr gut geeignet
  • sehr gut geeignet
  •  
  • gut geeignet
  • gut geeignet
  • nicht geeignet
  • nicht geeignet
  • gut geeignet
  • nicht geeignet

unsuitable    nicht geeignet
good    gut geeignet
very good    sehr gut geeignet

Ask for this product

Print this product
17

DPLNobilis Marker (5W)

 
Vertrieb International
ACI Laser GmbH
Österholzstraße 9
D-99428 Nohra

www.aci-laser.de
sales@aci-laser.de
Tel.: 03643/4152-0
Fax:03643/4152-77
 

Technical details


The DPLNobilis Marker operates at a wavelength of 532 nm in the visible spectral range. Because of the small spot diameter, filigree markings are possible and in addition only a small area of material is thermally affected. The laser is perfectly suitable for high contrast markings on plastics. But also copper, gold or generally high reflective materials can be marked quickly and precisely. The integrated thermoelectric air cooling ensures long system run times without high maintenance work. The system represents a solution in accordance with laser safety class 4. For operation in accordance with laser safety class 1, ACI Laser GmbH also provides complete solutions in the form of lasers in conjunction with different manual workplaces.

Fields of application

The BusinessDiode lasers can be used either at a manual workplace or as integration components in an automated system.

Software

The marking software MagicMark required for operation is included in the scope of delivery. This enables the marking of texts, graphics, codes such as Data Matrix or barcodes, serial numbers, logos, wraparound circumferential marking without lap marks on rotationally symmetrical work pieces. An intelligent rights management system supports the establishment of different operator groups, thus allowing customisation of the system to the user's individual requirements. Even fully automatic operation with data exchange to different data sources is possible for automated production lines without any problems.

Please contact our distribution partner in your home country for further information.

Lasertype:Nd:YVO4
Wave length:532 nm
Pumping principle :Longitudinal
Laser power:5 W
Number of adjustable pulse lengths:8-22 ns
Pulse repetition rate:60-300 kHz
Laser class:4
Input:max. 220 W
Labeling field size 1:60 x 60 mm
Labeling field size 2:110 x 110 mm
Labeling field size 3:180 x 180 mm
Weight:20 kg
Length:740 mm
Width:201 mm
Height:233 mm
Connected load:100-240 VAC / 16 A / 50-60 Hz
Interfaces:USB 2.0, SPS-Interface, Interlock PLe
  • Materials
  • Metal
  • Annealing marking
  • Coating ablation
  • Material ablation
  • Plastic
  • Foaming
  • Carbonation
  • Engraving
  • Glass
  • Ceramics
  • Wood, Paper, Leather
  •  
  •  
  • gut geeignet
  • gut geeignet
  • sehr gut geeignet
  •  
  • sehr gut geeignet
  • sehr gut geeignet
  • nicht geeignet
  • nicht geeignet
  • gut geeignet
  • nicht geeignet

unsuitable    nicht geeignet
good    gut geeignet
very good    sehr gut geeignet

Ask for this product

Print this product
18

DPLLexis Marker (2W)

 
Vertrieb International
ACI Laser GmbH
Österholzstraße 9
D-99428 Nohra

www.aci-laser.de
sales@aci-laser.de
Tel.: 03643/4152-0
Fax:03643/4152-77
 

Technical details


The DPLLexis Marker operates at a wavelength of 355nm in the ultraviolet spectral range and offers new opportunities for the marking of many materials. This laser is suitable especially for the precise marking of plastics and glass. The marking is produced by a very low heat. In this way, even highly sensitive products can be marked extremely gently and in a very high contrast without a thermal and mechanical stress of the material. The laser works with thermoelectric air cooling instead of high-maintenance air/water or water cooling, so that time-consuming maintenance work and expensive downtimes are avoided.The system represents a solution in accordance with laser safety class 4. For operation in accordance with laser safety class 1, ACI Laser GmbH also provides complete solutions in the form of lasers in conjunction with different manual workplaces.

Fields of application

The BusinessDiode lasers can be used either at a manual workplace or as integration components in an automated system.

Software

The marking software MagicMark required for operation is included in the scope of delivery. This enables the marking of texts, graphics, codes such as Data Matrix or barcodes, serial numbers, logos, wraparound circumferential marking without lap marks on rotationally symmetrical work pieces. An intelligent rights management system supports the establishment of different operator groups, thus allowing customisation of the system to the user's individual requirements. Even fully automatic operation with data exchange to different data sources is possible for automated production lines without any problems.

Please contact our distribution partner in your home country for further information.

Lasertype:Nd:YVO4
Wave length:355 nm
Pumping principle :Longitudinal
Laser power:2 W
Pulse energy:>15 µJ
Number of adjustable pulse lengths:10-18ns
Pulse repetition rate:40-200 kHz
Laser class:4
Input:max. 220 W
Labeling field size 1:60 x 60 mm
Labeling field size 2:110 x 110 mm
Labeling field size 3:180x180 mm
Weight:20 kg
Length:740 mm
Width:201 mm
Height:233 mm
Connected load:100–240 VAC / 16 A / 50-60 Hz
Interfaces:USB 2.0, SPS-Interface, Interlock PLe
  • Materials
  • Metal
  • Annealing marking
  • Coating ablation
  • Material ablation
  • Plastic
  • Foaming
  • Carbonation
  • Engraving
  • Glass
  • Ceramics
  • Wood, Paper, Leather
  •  
  •  
  • nicht geeignet
  • gut geeignet
  • gut geeignet
  •  
  • sehr gut geeignet
  • sehr gut geeignet
  • nicht geeignet
  • sehr gut geeignet
  • gut geeignet
  • gut geeignet

unsuitable    nicht geeignet
good    gut geeignet
very good    sehr gut geeignet

Ask for this product

Print this product